Energy 107

See it, schedule it, keep it healthy

Energy 107 is how we monitor and manage the systems we design and maintain. It brings battery, solar, genset, grid-meter and charger data into one view, runs the dispatch schedule your site needs, and tells our operations and maintenance (O&M) team when something needs attention.

Talk to usWhat it watches
Fig.: One view across a site. Schematic, not to scale.

What it watches

Every part of the system, in one view

If it produces, stores, converts or uses energy on your site, we bring its data into one place, sampled often enough to see what happened.

  • Battery

    • State of charge and state of health
    • Cell temperatures and voltage spread
    • Battery management system (BMS) alarms and trips

  • Power conversion system (PCS)

    • Power in and out
    • Efficiency and faults

  • Solar

    • Generation
    • Inverter status

  • Grid meter

    • Demand in 15-minute blocks
    • Energy by time-of-day slot
    • Power factor

  • Gensets

    • Running hours and starts
    • Loading
    • Fuel, where metered

  • Chargers

    • Status and faults over the Open Charge Point Protocol (OCPP)
    • Sessions and energy delivered

  • Safety systems

    • Detector status
    • Suppression system status
    • Door and ventilation alarms

Fig.: Seven kinds of equipment, one screen. Schematic, not to scale.

What it does

From data to decisions

Fig.: A demand limit held by the battery. Illustrative; no values. Schematic, not to scale.

  1. Dispatch schedules

    Time-of-day (ToD) and solar-shifting schedules built around your tariff and load.

  2. Demand guard

    Keeps 15-minute demand under the limit you set, by discharging the battery or easing charger power.

  3. Backup reserve

    Holds enough charge back for outages, so peak shaving never eats your resilience.

  4. Genset coordination

    Battery first, genset assist, with start and stop thresholds you agree.

  5. Charger load management

    Shares available connection capacity across chargers.

  6. Alarms & escalation

    Routes alarms to our O&M team and your staff, by severity.

  7. Reports, M&V and ESG data

    Monthly performance, annual test results, measurement and verification (M&V) for shared-savings contracts, and energy data for environmental, social and governance (ESG) disclosures: kWh shifted, genset hours avoided, solar self-consumption.

Works with your kit

Above the BMS, never around it

Energy 107 sits above the maker's BMS and PCS controls and never overrides their safety limits. It talks to equipment over Modbus TCP/RTU, IEC 61850, IEC 60870-5-104 and OCPP, so you are not locked to one maker's monitoring.

Its functions run through the energy management system (EMS) or SCADA that we integrate and configure for each site.

Fig.: Where Energy 107 sits. Schematic, not to scale.

Data & cyber

Your data, kept in order

  • You own your site data. We make raw BMS data access a condition in equipment specifications.
  • Protection signals are kept separate from monitoring networks.
  • No default passwords; named accounts; controlled remote access.
  • Firmware is updated under change control.
  • For generation and storage of 50 MW and above, the CEA Cyber Security in Power Sector Regulations 2026 apply from 1 April 2027. Notified

Source: CEA, Central Electricity Authority (Cyber Security in Power Sector) Regulations, 2026 (notification) (opens in a new tab) (31 July 2026).

Fig.: Protection and monitoring on separate paths. Schematic, not to scale.

Questions about Energy 107

No. The maker's BMS and PCS controls stay in charge of safety. Energy 107 coordinates the site above them.

Often, if the equipment supports open protocols and we can get access. We check during a baseline inspection.

A site view and a monthly report; the format is agreed per project.

Yes. Energy shifted, genset hours avoided and solar self-consumption can feed your Scope 1 and Scope 2 reporting, using the CEA's published grid emission factors. We report data; we don't promise carbon credits.

Source: CEA, CO2 Baseline Database for the Indian Power Sector (opens in a new tab) (latest version).

Start with a conversation

Let's bring your site's data into one place.

A phone call is enough to start. If you have them, 12 months of electricity bills, 15-minute meter data, DG running hours and any EV plans let us come back with a first view of what fits.

Talk to an engineerTalk to an engineer

Call +91 7200788891WhatsApp (opens in a new tab)info@che-energy.in